# How to repair foundation cracks

> Repair methods for foundation cracks by location: poured walls, slabs, brick, and block, with injection steps and when a crack needs an engineer.

Canonical: https://foundationrepairlab.com/how-to-repair-foundation-cracks/

Last updated: 2026-11-09

How to repair foundation cracks depends on where the crack is and how wide it is. A hairline crack at 1/16 inch or less in a poured wall can be sealed with a flexible filler, a vertical crack in a poured wall takes epoxy or polyurethane injection, and a slab crack takes a semi-rigid filler that keeps the edges from spalling. Any crack at 1/8 inch or wider needs a measurement history before repair.

## Identify the crack by location and direction

The location tells you which repair method applies, and the direction tells you whether the crack is structural.

Vertical cracks in the middle of a poured wall are usually shrinkage cracks. They are often widest at the top and narrow toward the floor.

Diagonal cracks that step along mortar joints in a block or brick wall point to differential settlement at a corner. They widen toward the side that has dropped.

Horizontal cracks in a basement wall, usually a third of the way down, point to lateral soil pressure and inward bowing. Sealing one of those hides the symptom.

Cracks at the corner of a window or door opening are usually concentration cracks from a lintel or a lack of reinforcement, and they often recur after sealing unless the opening is addressed.

## Repair methods by location

| Location | Crack type | Method | Notes |
|----------|------------|--------|-------|
| Poured wall | Vertical, dry | Epoxy injection | Restores stiffness across the crack |
| Poured wall | Vertical, leaking | Polyurethane injection | Flexible, seals active water |
| Poured wall | Horizontal | Wall anchor or strap | Restraint, not sealing |
| Slab | Random or map cracking | Semi-rigid filler | Keeps edges from spalling |
| Brick | Stair-step | Helical ties or stitching | Needs a structural diagnosis |
| Block | Stair-step | Injection plus reinforcement | Mortar joints are the weak plane |

Injection is the standard for poured walls because it fills the full depth of the crack rather than capping the surface. Epoxy is strong and rigid, and it is used where the crack is dry and the goal is to restore the wall's stiffness. Polyurethane expands and stays flexible, and it is used where water is active.

## Injecting a poured wall crack

Injection is a controlled process, and the preparation matters as much as the resin.

1. Clean the crack with a wire brush and compressed air, and remove any loose concrete at the edges.
2. Drill ports at an angle across the crack, spaced roughly 8 to 12 inches apart along its length.
3. Flush the crack with water or air until the ports run clear.
4. Seal the surface with an epoxy paste so the resin stays in the crack rather than running out.
5. Inject from the lowest port upward, stopping when resin appears at the next port, then move up.
6. Let the resin cure, cut the ports flush, and patch the surface.

A crack that is still moving will reopen beside the repair. That is why injection is paired with a cause fix: grading, downspouts, or drainage.

## Sealing a slab crack

A slab crack is usually cosmetic unless there is vertical displacement. Clean the crack, widen it slightly into a keyway, and fill with a semi-rigid epoxy or polyurea filler. A flexible sealant alone lets the edges rock and spall under foot traffic.

If one side of the slab crack sits higher than the other, the slab has settled or heaved, and filling the crack is cosmetic until the slab is lifted. Slab lifting runs $3 to $12 per square foot; a 300-square-foot patio at $6 per square foot is 300 x $6 = $1,800.

For a floor inside the house, check the slope with a level before sealing. A floor that drops more than about an inch across a room points to a support problem, not a crack problem.

## Brick and block cracks

Brick veneer cracks are usually a symptom of movement in the structure behind it. Stair-step cracks in a block wall follow the mortar joints because that is the weakest path through the wall.

Repair options are helical ties, which stitch the two sides of the crack together through the wall, and crack stitching with stainless reinforcement set into the mortar joints. Both are structural repairs. Painting over a stair-step crack in brick is not a repair, and it will reappear within a season.

Before any brick crack is stitched, the cause has to be identified. A corner that is still settling will crack the repaired joint again, and stitching will simply move the crack to the next weakest point.

## When the crack is a symptom

Four conditions mean the crack is a symptom rather than the problem.

The crack is at 1/8 inch or wider, or it has grown since the last measurement. There is displacement across the crack when you run a straight edge over it. The wall is out of plumb by more than 2 inches. The crack comes with a sticking door, a sloping floor, or a gap at the ceiling line.

Any of those calls for an engineer. A structural engineer inspection typically costs $400 to $1,500 and produces a scope. From there, the repair is priced by the unit: push piers at $1,000 to $3,000 each, helical piers at $700 to $2,500 each, wall anchors at $500 to $1,500 each, and carbon fibre straps at $400 to $1,200 each.

Six push piers at $1,700 each is 6 x $1,700 = $10,200, plus the inspection. Four wall anchors at $900 each is 4 x $900 = $3,600 for a bowing wall.

## Bottom line

Repair foundation cracks by matching the method to the location and width. Seal the hairline cracks, inject the poured wall cracks, fill the slab cracks, and stitch the masonry cracks only after the cause is known. For pricing on injection, see [crack injection cost](https://foundationrepairlab.com/crack-injection-cost/) and [epoxy versus polyurethane injection](https://foundationrepairlab.com/crack-injection-epoxy-vs-polyurethane/). For slab work, read [slab cracks repair](https://foundationrepairlab.com/slab-cracks-repair/), and for a bowing wall, [horizontal crack repair](https://foundationrepairlab.com/horizontal-foundation-crack-repair/).